Product parameters of 7 Ton Mining Dump Truck
Superior performance: optional Yunnei series reliable, low-speed high torque diesel engines. Large matching speed ratio, dedicated gearbox for heavy-duty mining vehicles. Double reduction high speed ratio drive axle, increasing speed ratio and lifting torque, driving torque more than 30% higher than the same power road vehicle, stable load starting, large carrying capacity, strong climbing ability, climbing up to 25 ° or more.
Strong load-bearing capacity: The enclosed box shaped steel frame is made of specialized steel plates, with a sturdy structure, high torsional and impact resistance, high rigidity, and long durability. Specially designed suspension system and matched with large-diameter mining specific tires ensure its strong load-bearing capacity.
High loading and unloading efficiency: The bottom 10mm and 5mm thick channel steel are fully welded to reinforce the mining area's dedicated U-shaped cargo box, with thick materials, strong impact resistance, and wear resistance. At the same time, the internal width of the cargo box is 1.7m, which is convenient for multi-directional loading of equipment such as scrapers and loaders, greatly reducing loading time. Equipped with a 1100mm large stroke three section lifting oil cylinder and a large flow gear pump, the lifting time is short, and unloading is convenient and fast, improving work efficiency.
Reliable production performance: equipped with widened brake friction plates at the front and rear, dual circuit air braking, ensuring the possibility of continuous production under heavy loads and downhill conditions. Spring energy storage and gas cut-off braking ensure the safety of mining car braking under complex working conditions.
Good maneuverability and passability: adopting a 2-axis structure, with a small turning radius, flexible maneuverability, low vehicle failure rate, and high attendance rate, it is suitable for use in mining areas with small loading and unloading areas, frequent turns, U-turns, and many uphill and downhill conditions.
Model | UQ-7 |
Engine Model | YUNEI 4102 |
Engine Power | 70KW/95HP |
Total Dimension | |
Transmission Model | Wanliyang 545 |
Transmission Gear | 5 Forward Gear, 1Back Gear,Rear High Speed Controller |
Drive Mode | 4x2 |
Front Axle Model | 1098 |
Rear Axle Model | 1098 |
Tire Model | 750x-6 Line Tire, Rear Double Tyre One Side, |
No.of Bottom Spring Plate | Front 10 PCS, Rear 10 PCS, Spare 6PCS |
Dimension of Bottom Spring Plate | Length 70mm, Width 10mm |
Size of the Bucket:Length×width×height | 3000mm*1800mm*600mm |
Type of Bucket | U type Bucket |
Thickness of Bucket Steel Plate | bottom 8mm side 6mm |
Unloading Type | Hydraulic Double Top Dump |
Steering Type | Hydraulic power steering |
Braking Type | Air Brake |
Cabin | Canopy |
Driving Position | Left Hand Drive |
Cooling sytem | Standard Water Cooling System |
Loading Capacity | 7 Tons |