| Drilling Depth | 10-130m |
|---|---|
| Maximum Open Hole Caliber | 260mm |
| End Hole Caliber | 75mm |
| Drill Rod Caliber | 50mm |
| Drilling Angle | 90~75 |
| Drilling Depth(m) | 30-200 |
|---|---|
| Drilling Diameter(mm) | 300-75 |
| Drilling Angel(mm) | 90-75 |
| Spindle Rotating Speed(r/min) | 64/128/287/557 |
| Spindle Stroke(mm) | 450 |
| Drilling Depth(m) | 30-200 |
|---|---|
| Drilling Diameter(mm) | 300-75 |
| Drilling Angel(mm) | 90-75 |
| Spindle Rotating Speed(r/min) | 64/128/287/557 |
| Spindle Stroke(mm) | 450 |
| Drilling Depth (m) | 300 |
|---|---|
| Wireline (m) | 260 |
| Air Drilling (m) | 200 |
| Drilling Diameter(mm) | 115-350 |
| Lifting Capacity（Ton） | 10 |
| Drilling Depth For Water Well | 350m（152mm~203mm） |
|---|---|
| 75mm Wireline Coring N Size | 600m |
| Borehole (Drill Bit) Dia. | Ø75～Ø350mm |
| Drilling Angle | 90° |
| Lifting Capacity | 120kN |
| Drilling Depth | 200m |
|---|---|
| Borehole (Drill Bit) Dia. | Ø115～Ø350mm |
| Lifting Capacity | 16 Ton |
| Thrusting Capacity | 8 Ton |
| Rotary Speed | 60~140 R/min |
| Drilling Depth | 200m |
|---|---|
| Hole Diameter | 300mm |
| End Hole Diameter | 75mm |
| Drill Pipe Diameter | 60mm |
| Dip Angle Of Hole | 90°～75° |
| Borehole Diameter | 36.5mm/46.5mm |
|---|---|
| Borehole Angle | 0°-360° |
| Spindle Speed | 400-1400 R/min |
| Spindle Output Torque | 87-300 N.m |
| Rated Pull Force | 30 Kn |
| Drilling Depth | 200m |
|---|---|
| Max Open Hole Caliber | 300mm |
| End Hole Caliber | 75mm |
| Drill Rod Caliber | 60mm |
| Drilling Angle | 90°-75° |
| Drilling Depth | 200m |
|---|---|
| Max Open Hole Caliber | 300mm |
| End Hole Caliber | 75mm |
| Drill Rod Caliber | 60mm |
| Drilling Angle | 90° |
