Product parameters of 12 tons Underground Mining Truck
The structure of the engine, chassis and cab of a dump truck is the same as that of a general truck. The high-pressure oil enters the lifting hydraulic cylinder through the distribution valve and the oil pipe, and there is a cab safety protection plate at the front end of the carriage. The engine drives the hydraulic pump through the transmission and the power take-off device. The hydraulic tilting mechanism of the carriage is composed of a fuel tank, a hydraulic pump, a distribution valve, a lifting hydraulic cylinder, a control valve and an oil pipe. The engine drives the hydraulic pump through the transmission and the power take-off device, and the high-pressure oil enters the lifting hydraulic cylinder through the distribution valve and the oil pipe, and pushes the piston rod to overturn the carriage. Lateral tipping is more common, and the movement of the piston rod is controlled by the steering system to stop the carriage in any desired tilted position. The carriage is reset using its own gravity and hydraulic control.
The truck Certified to mine safety standards. It have the characteristics of large traction, good climbing performance and strong transportation capacity.The truck Dimension is small, Suitable for working in narrow mine tunnel. Exhaust gas treatment is Water filter purifier, reducing air pollution when working in underground mines. Dump trucks can be used for: medium and short distance road transportation, pit coal mine transportation, sand transportation, and urban waste transportation. The underground transport vehicle has good climbing performance, not only can adapt to different environments, but also can perform well in places with large slopes. It is widely applicable to complex road conditions with narrow and curved roadways with large slopes. The underground transport vehicle is a model that is very suitable for use in mining areas.
Model | UQ-12 |
Engine Model | YUCHAI 4102 with Turbocharge |
Engine Power | 81KW/110HP |
Total Dimension | 5000*2000*1700mm |
Transmission Model | Wanliyang 545 |
Transmission Gear | 5 Forward Gear, 1Back Gear,Rear High Speed Controller |
Drive Mode | 4x2 |
Front Axle Model | 1098 |
Rear Axle Model | 1098 |
Tire Model | 825-16 Radial steel tire, Rear Double Tyre One Side, |
No.of Bottom Spring Plate | Front 10 PCS, Rear 10 PCS, Spare 6PCS |
Dimension of Bottom Spring Plate | Length 70mm, Width 10mm |
Size of the Bucket:Length×width×height | 3400mm*2000mm*700mm |
Type of Bucket | U-type |
Thickness of Bucket Steel Plate | bottom 8mm side 6mm |
Unloading Type | Hydraulic Double Top Dump |
Steering Type | Hydraulic power steering |
Braking Type | Air Brake |
Cabin | Canopy |
Driving Position | Left Hand Drive |
Cooling sytem | Standard Water Cooling System |
Loading Capacity | 12 Tons |